www.kctoolwarehouse.com

MAX SN883CH
34 Degree 3-1/4"Framing Nailer

Features:

• Nail Range: 2" to 3-1/4" Nails
• Nail are available in both the "D" Head  and  "OFF Set" Round Head.
• The tool will shoot the nails:

                               Ring Shank
                               Smooth Shank
                               Galvanized Wire
                               Bright Wire

• This tool uses the same nails as the Paslode F-350S, Hitachi NR83AA3, NR90AD and Senco 901XP.
• Compact Design only 12-1/4" Tall
• Selective Trigger System.  The tool is shipped with a new design trigger system.  Comes from the factory in a single actuation mode.  By removing the pin in the trigger, the trigger becomes anti-double fire.(US Patent 5507106)
• Open Nose for easy jam clear.  Nail jam is easily cleared just remove the nail.
• Dial adjustable depth control.  Dial depth control requires no special tools.
• Pointy teeth on contact arm.  Teeth let the user get a firm grip when toe-nailing
• Maintenance free end cap filter(US Patent 5637125).  It prevents foreign substances from entering the tool.  Internal parts last longer and the inside of the tool is kept clean.  The filter has a self-cleaning feature: foreign  substances are ejected automatically from the tool when the air hose is disconnected.
• Comfortable rubber grip
• Ultra lightweight only 7.2lbs.

• MODEL
• SN883CH/34
• 
  FIRING METHOD
• Selective trigger system
• (Single fire only or anti-double fire mechanism)
• 
  WEIGHT
• 6.8 lbs. (3.1 kg)
• 
  DIMENSIONS
• 12-1/4"(H) x 4-3/4"(W) x 18-1/8"(L)
• LOAD CAPACITY
• 90 nails
• 
  OPERATING PRESSURE
• 70-100 psi (Regulator)
• 
  AIR CONSUMPTION
• 0.077ft3 /cycle (90 psi operating pressure)

Click Here for Parts List

Click Here for Parts Chart

Click Here for Owner's Manual