www.kctoolwarehouse.com

Simpson Strong Tie LUS28Z
2" x 8" ZMAX Coated
Joist Hanger

• Finish: ZMAX® coating For complete specifications visit http://www.strongtie.com
• Installation: Use all specified fasteners. Nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
• Not designed for welded or nailer applications.
  
• 16d sinkers (0.148" diameter  x 3 1/4" long) may be used where 10d commons are specified with no reduction in load. Where 16d commons are specified, 10d commons or 16d sinkers (0.148" dia. x 3 1/4" long) may be used at 0.85 of the table load. With 3x carrying members, use 16d x 2 1/2" nails into the header and 16d commons into the joist with no load reduction. With 2x carrying members, use 10d x 1 1/2" nails into the header and 10d commons into the joist, reduce the load to 0.64 of the table value.
  
• Use stainless steel (SS) nails with stainless-steel (SS) hangers.
  
• Options: LUS hangers cannot be modified.
• HUS hangers available with the header flanges turned in for 2-2x (3 1/8") and 4x only, with no load reduction
•  See the HUSC Concealed Flange illustration. Code Report: http://www.icc-es.org/reports/pdf_files/ICC-ES/esr-2549.pdf