www.kctoolwarehouse.com

Simpson Strong Tie THD37300H
Titen HD

• The Titen HD® anchor is a patented, high-strength screw anchor for concrete and masonry.
• It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors.
• The high strength, easy to install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions.
• The self-undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings.
• Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications. GALLERY: roll over images below to see larger image Titen HD® screw anchor U.S. Patent 5,674,035 & 6,623,228 Serrated teeth on the tip of the Titen HD® screw anchor facilitate cutting and reduce installation torque. Suitable for use in place of code anchor bolts. New longer 1/2" diameter Titen HD® anchors achieve sufficient embedment depth to develop tension loads equal to many Simpson Strong-Tie holdowns that specify a 5/8" diameter anchor. Testing has been conducted to assure compatibility of these holdowns’ anchor holes with the 1/2" Titen HD screw anchor.
  
• The Titen HD® screw anchor 3/4 x 6 and 3/4 x 7 (models THDT75600H and THD75700H) have a 1" section under the head that is unthreaded to allow installation into tilt-up wall braces.
  
• For more information and complete engineering specifcations, please send an email to sales@ciscotool.com