www.kctoolwarehouse.com

MAX SN883CH/28
28 Degree Wire Weld
Framing Nailer

Features:

• Uses 28 Degree Wire Welded Nails. You can use Bostitch's 28 degree Nails with this tool
  
• Nail Rand is  from 2" to 3-1/2" Nails. Nail are available in both the "D" Head and the new Round Drive. 
  
• Nails are available in:  

                              Ring Shank
                              Smooth Shank
                              Galvanized Wire
                              Bright

• Compact Design only 12-1/4" Tall
• Selective Trigger System.  The tool is shipped with a new design trigger system.  Comes from the factory in a single actuation mode.  By removing the pin in the trigger, the trigger becomes anti-double fire.(US Patent 5507106)
• Open Nose for easy jam clear.  Nail jam is easily cleared just remove the nail.
• Dial adjustable depth control.  Dial depth control requires no special tools.
• Pointy teeth on contact arm.  Teeth let the user get a firm grip when toe-nailing
• Maintenance free end cap filter(US Patent 5637125).  It prevents foreign substances from entering the tool.  Internal parts last longer and the inside of the tool is kept clean.  The filter has a self-cleaning feature: foreign  substances are ejected automatically from the tool when the air hose is disconnected.
• Comfortable rubber grip
• Ultra lightweight only 7.2lbs.
  

• FIRING METHOD
• Contact trip with anti-double fire mechanism
• WEIGHT
• 4.9lbs (2.2 kg)
• DIMENSIONS
• 12-9/16"(H)x 5-1/8"(W) x 10-3/4"(L) (320 x 130 x 273mm)
• LOAD CAPACITY
• 250 - 400 nails (Wire welded nails)
• 200 nails (Plastic collated nails)
• OPERATING PRESSURE
• 60-100 psi (4-7 kg/cm2)(Regulator)
• AIR CONSUMPTION
• 0.035ft3(1.0lit) /cycle at 90psi(6 kg/cm2)

Click Here for Parts List

Click Here for Parts Chart

Click Here for Owner's Manual